Sander Marine GmbH&Co.KG

Julius-Bamberger-Str.1
D-28279 Bremen

Phone +49 (0)421 48603-0
Fax  +49 (0)421 48603-89

 info(at)sander-marine.com


PDF-download

 Ball valves (494 KB)


   

..... also available:


Ball valve DN 200 PN16 with full bore, with PTFE sealing
face to face acc. to EN 558-27
with double-acting pneumatic actuator
with manual emergency hand operation
mounting with bracket and coupling
with limit switch box
with position indicator
with 5/2-way solenoid valve with 2 coils 24V/DC
with appliance plug

flanges PN16 dim. and drilled
1.4408/1.4408 (CF-8M)

   

further designs are possible ....  ask us !

3-part Ball valves, screwed ends | CuAl10 Ni

New in our product range are our 3-part ball valves, threaded design with ISO 5211 - top-flange for mounting from actuators.

 

Our 3-part ball valves with screwed ends made of aluminium-bronce are available for extreme working conditions in strong corrosive areas in seawater and offshore plants.

Less erosion and high lifetime gain our ball valves throught their material and allows to use also in seawater cooling-systems.

 

Advantages of our ball valves:

• less flow loss caused by full bore

• less erosion

• higher lifetime

• reduced costs for maintenance

• less default risk

 

Product features:

• nominal diameter DN 8 - DN 50

• nominal pressure PN40

• temperature range from -10°C up to +80°C

• lockable

• on request NST or NPT-thread

• on request with butt welding connection

 

Furthermore our ball valves are available with following actuators for remote operation:

• pneumatic actuators double acting or spring return
• hydraulic actuators incl. hand pump station for remote control
• electric actuators

 

Ball valves made of gunmetal and CuAl10Ni (Offshore)

New in our product range is the ball valve made of gunmetal and of CuAl.

The design of this ball valve is full bore, a top-flange acc. to EN558-27 and a ball made of stainless steel.

Suitable for pressed air, gases, cold and hot water, fuels and other neutral non aggressive medien with temperatures up to 150°C.

 

• diameter from DN 15 up to DN 100

• nominal pressure PN16

• ball material stainless steel

• ISO-top-flange acc. to EN 558-27 for

   assembly of actuators

• flanges acc. to PN16 dim. and dril.

• flanges acc. to ANSI or JIS possible

• lockable on request

 

Also you can get our ball valves with electrical and pneumatic actuators.

     

You are searching for furthermore designs, different material, diameters, working pressures or temperature ranges ?

 

 Please ask us !